4.2.1 Open the UART serial option
UAR serial choose “on “
Menu: Factory-->Options–>UART–>on
If finish the updating and data adjust UART serial, UART choose “off “
4.2.2 Novatek USB-serial driver
It’s the same as Mstar bebug Tool.
If First use Mstar bebug Tool, you have to install drive software for bebug board.
If your PC is Windows XP system:
First install FTCUNIN.EXE of FTC100103(MSTAR) rar file in your PC.
This is a drive software of Mstar
To Next Page
Loading...
