Another:
If your PC is Win7 system, you will have to install CDM20802_Setup_WIN7 rar file，and then open the
software of SecureCRT in your PC.
4.2.3 Stop board serial connect with SecureCRT
Run SecureCRT,printing information includes three status:Mboot\Supernova\no print information.
Current steps:
1) Run SecureCRT.exe
2) TV power on.
3) SecureCR tool print information can appear or not.
How to distribute the three status?
1) appearing “N62020_A32_SEC>” that meaning is in Mboot status;
2) Rolling many informmation automatically that meaning is in Supernova status;
3) No any print information that meaning the eMMC of board is no program.
Stop board serial with SecureCRT
1) In mboot status:
N62020_A32_SEC>
Input “shift” and “~” key to ensure, then close the SecureCRT window.
2) If no any print information with SecureCRT,then can directly close the SecureCRT window.
To Next Page
