Hisense PureFlat RF22B3FSE - Installing Your New Appliance; Ventilation and Placement

Installing your new appliance
Before using the appliance for the first
time, you should be aware of the
following tips.
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain
good ventilation around the
appliance for the dissipation of
heat. For this reason, sufficient
clear space should be available
around the refrigerator.
Suggestion:
It is advisable for there to be at
least 50mm (2'') of clearance from
the back to the wall, at least 12mm
(1/2'') clearance from its top, at
least 12mm (1 2'') from its side to/
the wall and a clear space in front
to allow the doors to open 160°. As
shown in the following diagrams.
Ventilation of appliance
Relevant information (mm)
790
W
338
W1
338
W2
730
D
1151
D1
Stand your appliance in a dry place to
avoid high moisture damage. Keep the
appliance out of direct sunlight, rain or
frost. Stand the appliance away from
heat sources such as stoves, fires or
heaters.
This appliance performs well in the
environment temperature from
12.8°C (55°F) to 43.3°C (110°F). It may
not work properly if being left at a
temperature above or below the
indicated range for a long period.
Note
06
12mm
50mm
12mm
1725mm
≥1/2''
D1
W2
W
D
≥1/2''
W1
D2
1285
D2