Hisense RB390N4BW2 User Manual

11
4.Removetheupperdoorfromthe
middlehingebycarefullyliftingthe
doorstraightup. Thenplacethe
upperdooronasmoothsurfacewith
itsuppercoverupwards.
Whentherefrigeratorwitha
displayondoor,takescrewhole
cover(right)fromplasticbagand
installitontothetoprightsideof
refrigeratorbody.Thenremove
screwholecover(left)fromthetop
leftsideofapplianceandputitinto
plasticbag.
Whentherefrigeratorwithouta
displayondoor,pulloutscrewhole
coverfromtheleftsideuprightly,
andfixitontherightside.
5.
6.Whentherefrigeratorwitha
displayondoor,removepart from
thetopleftsideofuppercoverand
takeoutpart . Thenremovepart
andputpart into thetopright
sideofuppercover.Refertoabove
operation,installpart andpart
ontothetopleftsideofupper
cover.Installpart ofthetopright
sideofuppercover.Whenthe
refrigeratorwithoutadisplayon
door,skipthisstep.
①
②
③ ④
③ ④
①
7.Loosescrew andtakedown
part andpart ,Install
replacementdoorstopper-left
provided(intheplasticbag)andpart
(stopblock)totheleftsidewith
screw .Keeppart withthe
applianceforfuturereference.
8.Loosescrewsusedtofixthe
middlehingeandremovemiddle
hinge. Thenremovethelowerdoor.
③
②
②
③
①
①
④
① ornercover left
Electricalconnector left
Cornercover right
Electricalconnector right
( )
② ( )
③ ( )
④ ( )
C
MODEL WITH DISPLAY
MODEL WITH DISPLAY
Screwholecover Screwholecover
MODEL WITHOUT DISPLAY
41 / 61

Hisense RB390N4BW2 Specifications

General

Brand	Hisense
Model	RB390N4BW2
Category	Freezer
Language	English