Hisense RB390N4WC1 User Manual

8
it.In this case retain packing.
It is advisable to wait at least four hours before
connecting the appliance to allow the oil to flow back in the
compressor.
Adequate air circulation should be around the appliance,
lacking this leads to overheating. To achieve sufficient
ventilation, follow the instructions relevant to installation.
Wherever possible the back of the product should not be
too close to a wall to avoid touching or catching warm parts
(compressor, ) to prevent the risk of a fire, follow
the instructions relevant to installation.
The appliance must not be locate close to radiators or
cookers.
Make sure that the mains plug is accessible after the
installation of the appliance.
Any electrical work required to do the servicing of the
appliance should be carried out by qualified electrician or
competent person.
This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
●
●
●
●
●
●
●
Service
condenser

Hisense RB390N4WC1 Specifications

General

Door hinge	Right
Control type	Touch
Display type	LED
Product color	Stainless steel
Built-in display	Yes
Shelves material	Glass
Custom panel-ready	-
Appliance placement	Freestanding
Inverter technology	No
Star rating	4*
Freezer position	Bottom-placed
Freezing capacity	9 kg/24h
Freezer net capacity	93 L
Freezer number of shelves/baskets	3
Storage time during power failure	16 h
Noise level	38 dB
Climate class	SN-ST
Water supply type	Water tank
Total net capacity	300 L
Total gross capacity	323 L
Minimum operating temperature	10 °C
Fridge net capacity	203 L
Number of vegetable drawers	1
Connected load	- W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Annual energy consumption	304 kWh
Package depth	628 mm
Package width	645 mm
Package height	1935 mm
Package weight	76000 g

Weight and Dimensions

Depth	589 mm
Width	595 mm
Height	1860 mm
Weight	71000 g