27
Tempe rature ins ide is
too warm
You may have left the doors open too long or too
frequently; or the doors are kept open by some obstacle;
or the appliance is located with insufficient clearance at
the sides, back and top .
Tempe rature ins ide
is too cold
Do ors can’t be
cl osed easil y
Increase the temperature by following the“Display controls”
chapter.
Ch eck whethe r the top of the refrig erator is tilted back by
10 -15mm to allow the doors to self close, or if something
in side is preventing the door s from closing.
Water drips
on the floor
●
●
The LED light may be damaged Ref er to replace LED
li ghts in cleaning and care chapter.
The controI system has disabled the lights due to the
do or being kept open too long,close and reopen s the door
to reactivat e the Iights.
.
The light is not working
Alayer of frost oc curs
in the compartment
Ch eck that the air outlets are not blocked by food and
en sure food is placed within the appliance to allow
su fficient ventilation.E nsure that door is fully closed.To
re move the frost, please re fer to the“Cleaning and care”
ch apter.
The water pan (located at the rear bottom of the cabinet)
may not be properly leveled, or the draining spout under
neath the top of the compressor depot may not be properly
positioned to direct water into this pan, or the water spout is
blocked. You may need to pull the refrigerator away from the
wall to check the pan and spout.
Check if the refrigerator is power-offfor a long time, this may
cause the ice in the bucket to melt into water,and flow to the
floor .
To Next Page