Hisense RF225A3CSE - Installing Your New Appliance

Installing your new appliance
Before using the appliance for the first
time, you should be aware of the
following tips.
In order to improve efficiency of
the cooling system and save
energy, it is necessary to maintain
good ventilation around the
appliance for the dissipation of
heat. For this reason, sufficient
clear space should be available
around the refrigerator.
Suggest:
It is advisable for there to be at
least 2"(50mm) of space from the
back to the wall, at least 1/2" (12
mm) from its top, at least 1/2" (12
mm) from its side to the wall and
a clear space in front to allow the
doors to open 125°, as shown in
the following diagram.
Ventilation of appliance
Ambient temperature
+50°F to +90°F
+61°F to +90°F
+
61
°
F to +
100°F
+61°F to +109°F
Climate class
SN
N
ST
T
Stand your appliance in a dry place to
avoid high moisture damage. Keep the
appliance out of direct sunlight, rain or
frost. Stand the appliance away from
heat sources such as stoves, fires or
heaters.
This appliance performs well in the
climate class from N to T. It may
not work properly if being left at a
temperature above or below the
indicated range for a long period.
Note
08
35.7"
56.5"
44"
24"
≥1 /2"
70.3"
35.9"
28.7"
≥1 /2"
≥1 /2"
≥2"