1. Check the height difference
between the doors and then lift
and hold the lowest door to be
even with the other.
2. Insert a suitably sized Snap Ring
between the Door and the Hinge
as shown.
To adjust the Height of Door
Contains Small Parts, keep the
Snap Rings Away From Babies
and Children.
Warning
Installing your new appliance
Insert only one Snap Ring. If you
insert two or more Snap Rings,
they may slip out or cause a
rubbing noise.
Do not raise the door too much.
The door may contact and
damage the top cover.
Save remaining Snap Rings for
possible future use.
IMPORTANT !
10
To Next Page
Loading...
