EasyManuals Logo

Hisense RF632N4WFE User Manual

Hisense RF632N4WFE
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
Brief introduction
Control panel
Use your appliance according to the following control regulations, your appliance has the
corresponding functions and modes as the display panels showed in the pictures below.
When the appliance is powered on for the first time, the backlighting of the icons on display
panel starts working. If no buttons have been pressed and the doors are closed, the
backlighting will turn off.
Power Icon
A
Power Control
B
Fridge Compartment
Temp Icon
C
Freezer Compartment
Temp Icon
D
Zone Choice
E
Celsius Indicator
F
Temperature
G
Temp Control
H
I
Super Cool Icon
Holiday Icon
J
Super Freeze Icon
K
Mode Control
L
Press POWER 3 seconds to turn the power
on, and press 3 seconds to turn the power
off and will display “OF”.
When you set a temperature, you are
setting an average temperature for the
entire compartment. The actual
compartment temperatures may vary from
the temperatures displayed depending on
the amount and placement of stored food,
and the surrounding room temperature.
1.Press ZONE repeatedly until the Fridge
icon appears.
1.Press ZONE repeatedly until the Freezer
Choice appears.
2.When Freezer is on, is illuminated and
then press TEMP. repeatedly to cycle
through the available temperature settings,
from -14°C to -24°C.
NOTE: Each press of the button advances
the setting by one degree.
The Super Cool feature helps to keep food
stored in the refrigerator at the set
temperature during periods of high usage,
large grocery loads, or temporarily warm
room temperatures.The Super Cool feature
lowers the temperature in the fridge
compartment to 2°C to cool food faster.
3.Release the TEMP. Control when the
desired temperature setting appears.
3.Release the TEMP. Control when the
desired temperature setting appears.
2. When Fridge is on, is illuminated and
then press TEMP. repeatedly to cycle
through the available temperature settings,
from 8°C to 2°C.
NOTE: Each press of the button advances
the setting by one degree.
Recommended Temperature Settings
Freezer Compartment Temperature
Refrigerator (Fridge) Compartment
Temperature
Setting Compartment Temperatures
• Fridge Compartment: 4°C
• Freezer Compartment: -18°C
8°C 7°C 6°C 5°C
4°C3°C2°C
-24°C -23°C
-14°C -15°C
.........
Super Cool
1. Press MODE repeatedly until the Super
Cool icon appears.
NOTE: When Super Cool is on, is
illuminated and 2°C appears in the
temperature display.
2. Press MODE to manually turn off Super
Cool and return to the previously set
temperature.
17

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense RF632N4WFE and is the answer not in the manual?

Hisense RF632N4WFE Specifications

General IconGeneral
Control typeTouch
Display typeLED
Product colorBlack
Product designFrench door
Built-in display-
Shelves materialTempered glass
Custom panel-readyYes
Appliance placementFreestanding
Anti-bacterial sealNo
Fridge net capacity336 L
Fridge door balconies6
Number of vegetable drawers1
Fridge number of shelves/baskets2
Noise level38 dB
CertificationCE, UKCA
Climate classSN-T
Cooling systemVentilated
Water supply typeWater tank
Total net capacity485 L
Star rating4*
Freezer positionBottom-placed
Freezing capacity11 kg/24h
Freezer net capacity149 L
Storage time during power failure10 h
Cord length2 m
Connected load0 W
Power plug typeType G
AC input voltage220 - 240 V
AC input frequency50 Hz
Energy efficiency scaleA to G
Annual energy consumption295 kWh
Country of originChina
Package depth738 mm
Package width750 mm
Package height2111 mm
Package weight101000 g
Weight and Dimensions IconWeight and Dimensions
Depth694 mm
Width700 mm
Height2000 mm
Weight92000 g

Related product manuals