Hisense RS818N4TFE User Manual

adjusta e bottomf etbl e
adjusta e bottomf etbl e
Warning!
For proper installation, this refrigerator
must be placed on a level surface of
hard material that is the same height
as the rest of the flooring. This surface
should be strong enough to support a
fully loaded refrigerator.
The rollers, which are not castors,
should be only used for forward or
backward movement. Moving the
refrigerator sideways may damage
your floor and the rollers.
Leveling of appliance
For sufficient leveling and air
circulating in the lower rear section of
the appliance, the bottom feet may
need to be adjusted. Please use a
suitable spanner.
To allow the doors to self-close, tilt
back the top backwards at about
15mm or 0.5 by turning the°
adjustable feet.
Whenever you want to move the
appliance, remember to turn the feet
back up, so that the appliance can roll
freely. Reinstall the appliance when
relocating.
9
15mm
0.5
40 / 213

Hisense RS818N4TFE Specifications

General

Control type	Touch
Display type	LED
Product color	Black
Product design	American door
Built-in display	Yes
Shelves material	Tempered glass
Appliance placement	Freestanding
Number of compressors	1
Fridge net capacity	417 L
Number of vegetable drawers	2
Fridge number of shelves/baskets	3
Noise level	38 dB
Water filter	No
Certification	CE, UKCA
Climate class	SN-T
Cooling system	Ventilated
Water supply type	Water tank
Total net capacity	632 L
Water tank capacity	4.5 L
Cord length	2 m
Star rating	4*
Freezer position	Side-placed
Freezing capacity	11 kg/24h
Freezer net capacity	215 L
Freezer number of shelves/baskets	4
Storage time during power failure	8 h
Power plug type	Type G
AC input voltage	220-240V V
AC input frequency	50 Hz
Annual energy consumption	346 kWh
Package depth	787 mm
Package width	978 mm
Package height	1860 mm
Package weight	128000 g
Country of origin	China

Weight and Dimensions

Depth	730 mm
Width	910 mm
Height	1790 mm
Weight	118000 g