Hisense RT393D4AW1 User Manual

36
12. Transfer the lower door to the property
position, adjust the lower hinge part, make
the hinge axis into the lower hole of the
lower door, then tight the bolts.
13. Upturn the middle hinge part the
direction 180 degree, transfer it and adjust
its position ,Make the middle hinge axis into
the upper hole of the lower door, tight the
bolts.
14.Transfer the upper door to the
appropriate position. Secure the door's level;
make the middle hinge axis into the lower
hole of the upper door.
15. Transfer the upper hinge part and make
the upper hinge axis into the upper hole of
the upper door,and adjust the position of the
upper door(please support the upper door
with your hand when doing it),fixing the
upper hinge part with the special flange self-
tapping screws.
upper hinge part
16. Install the screw hole cover on the top
right corner of the refrigerator. Install the
upper hinge cover (which is in the plastic
bag) on the left corner and screw it.Put the
other upper hinge cover into the plastic bag.
screw
upper hinge cover (left)
screw hole
cover
17. Open the upper door and install the door
shelves, then close it.
Warning!
When changing the side at which the door
opens, the appliance must not be connected
to the mains. Remove plug from the mains
beforehand.

Hisense RT393D4AW1 Specifications

General

Brand	Hisense
Model	RT393D4AW1
Category	Refrigerator
Language	English