11
Reversing the door
The side at which the door opens can be
changed, from the right side (as
supplied) to the left side, if required.
Warning! When reversing the door, the
appliance must not be connected to the
mains. Ensure that the plug is removed
from the mains socket.
Tools you will need
Note: If required you may lay the
refrigerator on its back in order to gain
access to the base, you should rest it on
soft foam packaging or similar material
to avoid damaging the backboard of the
refrigerator. To reverse the door, the
following steps are generally
recommended.
1. Stand the refrigerator upright. Open
the door to take out all door racks(to
avoid damage) and then close the door.
Caution! Please slightly squeeze the
door rack from two sides toward centre
and inside of door rack,and then move it
upward when taking out.
2. Remove right upper hinge cover ①on
top of the cabinet. Remove the 3
screws② which are used for fixing the
right upper hinge part (see the picture
below) and take down the upper hinge
parts③
②
③
③upper hinge parts
①hinge cover
②self-tapping screw
To Next Page
Loading...
