12
4. Remove the upper door from the
middle hinge by carefully lifting the door
straight up.
5. Place the upper door on a smooth
surface with its panel upwards. Loose
screw ③ and take down part ② and part
①, Install replacement door stopper-
left ④ and stop block⑤provided (in the
plastic bag) to the left side with screw③.
Keep part ① and ② with the appliance
for future reference.
6. Loosen screws that are used to fix the
middle hinge and remove middle hinge.
Then remove the lower door.
7. Place the lower door on a smooth surface
with its panel upwards. Loose screw ③ and
take down part ② and part ①, Install
replacement door stopper-left ④ and stop
block ⑤ provided (in the plastic bag) to the
left side with screw ③. Keep part ① with the
appliance for future reference.
Caution! Please hold the upper door in
place during step 2 to prevent the door
dropping.
3. Remove screw cover from the left-front
corner of cabinet with thin-blade screwdriver
and install it to the right-front corner.
8. Change screw hole covers and screw
on middle cover plate from left to right
(as shown in figure below).
①
②
③
① Door stopper
②Stop block
③Self-tapping screw
①
②
③
① Door stopper
②Stop block
③Self-tapping screw
To Next Page
Loading...
