Hisense U3120G Quick Start Guide

* Power cord quantity and plug type vary by regions
Main Unit
Quick Start Guide
3.1.2CH Soundbar with wireless subwoofer
Model: U3120G
1
2
Remote control
What’s in the Box
Main Unit
Remote Control /
AAA Battery x 2
Wireless Subwoofer
*AC Power Cord x2
Replace the Remote Control Battery
1 Press and slide the back cover to
open the battery compartment of
the remote control.
2 Insert two AAA size batteries
Make sure the (+) and (–) ends of
the batteries match the (+) and
and (–) ends indicated in the battery
compartment.
3 Close the battery compartment cover.
HDMI Cable
- Do not mix old and new batteries;
- Do not mix alkaline, standard (Carbon-Zinc) or
rechargeable (Ni-Cd, Ni- MH, etc.) batteries.
Identifying the Parts
1
Switch the unit between ON and
STANDBY mode.
12 (MUTE) Mute or resume the volume.
2 (SOURCE) Select the play mode.
4
(BT) Select the Bluetooth mode.
3 SURR Adjust the surround ON/OFF.
5 EQ Select MUSIC/MOVIE/NEWS/SPORT/
NIGHT/GAME/
AI EQ
11 DIMMER+/- Adjust display brightness.
9 BASS+/- Increase/decrease the bass level.
10 TREBLE+/- Increase/decrease the treble level.
7 VOL+/VOL- Increase/decrease the volume level.
6 / Skip to previous/next track in
BT/USB mode.
8
Play/pause/resume playback in
BT/USB mode.
Screw x 2
Expansion screw x 2
User Manual/Quick Start Guide
EN
Optical Cable
1
PAIR button
Press activate the pairing function between
the main unit and the subwoofer.
2
PAIR Indicator
Light stops blinking once the Subwoofer is
paired with the Soundbar.
2 Remote Control Sensor
Receive signal from the remote control.
1 Display Window
Show the current status.
4
(ON/OFF) button
Switch the unit between ON and Standby
mode.
5
(SOURCE) button
Select the play function.
6 VOL+/VOL- buttons
Increase/decrease the volume level.
7 Wall Mount
Install the wall mounting screws into the
wall mount of the unit.
13 USB Socket
Insert the USB device to play music.
14 AC IN Socket
Connect to the power supply.
Wireless Subwoofer
3 AC IN Socket
Connect to power.
9 OPTICAL Socket
8 COAXIAL Socket
10 HDMI OUT
(eARC/ARC) Socket
Connect to a TV via HDMI cable.
11 HDMI IN Sockets
12 TYPE-C Sockets (Only for rear surround
Speakers)
3 Standby indicator
Pass through

Hisense U3120G Specifications

General

Subwoofer included	Yes
Subwoofer location	Separate
Subwoofer connectivity	Wireless
Woofer diameter (subwoofer)	8 \
Audio decoders	DTS-HD Master Audio, DTS:X, Dolby Atmos, Dolby Digital Plus
RMS rated power	420 W
Audio output channels	3.1.2 channels
Display type	LED
Product color	Black
LED indicators	Stand-by
Audio formats supported	AAC, AAC+, ALAC, FLAC, MP3, WAV, WMA
AC input voltage	100 - 240 V
AC input frequency	50/60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	30 W
Wi-Fi	No
HDMI in	1
Bluetooth version	5.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless
Cables included	AC, HDMI, Optical
Number of products included	1 pc(s)
Number of tweeter drivers	2
Soundbar speaker RMS power	- W
Number of full-range drivers	6
Package type	Box
Package depth	502.92 mm
Package width	1092.2 mm
Package height	309.88 mm
Package weight	13000 g

Weight and Dimensions

Depth	111.76 mm
Width	990.6 mm
Height	60.96 mm
Soundbar weight	3400 g
Subwoofer depth	342.9 mm
Subwoofer width	248.92 mm
Subwoofer height	345.44 mm
Subwoofer weight	7200 g