Charging the battery
New batteries are shipped partially charged. Before you
can use your phone, you need to charge the battery. Some
batteries will have best performance after several full
charge/discharge cycles.
1. Connect data cable and charger, plug one end into
your phone’s data port.
2. Plug the other end of the charger into the appropriate
electrical outlet (100~240V AC).
3. When your phone indicates that the battery is fully
charged, remove the charger.
Notes:
1. Before charge, make sure the battery is installed in the
phone.
2. The battery can discharge gradually even when your
phone is powered off. If the battery is drained for a long
time, the information stored in the phone could
possibly be lost. So even you don’t need to use your
phone for a long period, you should charge the battery
some times to keep it away from drained.
3. You need longer charging period with the lower
voltage.
4. Charging time will be longer if the cellphone is
operated during charging.
5. The normal charge temperature is during 0℃-40℃.
Battery performance
Many conditions can affect battery’s standby time,
such as local network conditions, phone’s settings,
frequent operations, using data services, etc.
The battery performance is also affected by charge
state and temperature.
6
To Next Page
Loading...
