Hisense WFPV6012EM User Manual

11
10
CONNECT THE DRAIN HOSE
In case the drain hose is installed
as shown below:
Unhook it only from the right clip (see arrow)
Connect the drain hose to the drain or
hook it over the edge of a sink by means of the
"U" bend.
Fit the “U” bend D, if not already installed, at
the end of the drain hose.
Ensure that there are no kinks in the drain hose.
Secure the hose so that it cannot fall down. After wash
phase, machine will drain out hot water.
Small hand basins are not suitable.
To make an extension use a hose of the same type and
secure the connections with clips.
Max. Overall drain hose length: 2.50 m.
D
24

Hisense WFPV6012EM Specifications

General

Door color	Black
Door hinge	Right
Water fill	Cold
Control type	Buttons
Loading type	Front-load
Product color	White
Reversible doors	No
Custom panel-ready	Yes
Appliance placement	Freestanding
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	- L
Package depth	505 mm
Package width	650 mm
Package height	885 mm
Package weight	60000 g
Drum capacity	6 kg
Spin-drying class	B
Maximum spin speed	1200 RPM
Noise level (spin)	76 dB
Noise level (wash)	58 dB
Number of washing programs	15

Weight and Dimensions

Depth	460 mm
Width	595 mm
Height	850 mm
Weight	58000 g