Hisense HUI6220XCUS User Manual (English)

Questions and Answers:

S
Stacy YoungAug 22, 2025
What to do if water remains in my Hisense HUI6220XCUS Dishwasher after cycle?
- V
  Vickie PrattAug 22, 2025
  If water remains in your Hisense dishwasher above the filters, it could be due to: * Blocked filters; clean the coarse and fine filters. * Incorrectly fitted filters; check that the filter handle is locked in the stop position. * Debris in the drain pump; clean the drain pump. * A missing drain pump stop; check that the colored stop on the right in the bottom drain is in place. * A kink in the drain hose; ensure the hose is free from kinks. * A blocked drain hose; check for any clogs and ensure the cone-shaped part of the drain boot is correctly sized.
J
James JonesAug 25, 2025
What does error code F54 mean on Hisense HUI6220XCUS?
- J
  Jesse VaughanAug 25, 2025
  To address the F54 error on your Hisense dishwasher, which indicates overfilling, turn off the water supply valve.
T
Theresa WongAug 26, 2025
Why are there spots or films on dishes from my Hisense Dishwasher?
- W
  wrobbinsAug 26, 2025
  Spots or films on dishes in your Hisense dishwasher can occur due to: * An incorrect rinse aid dosage setting. * Too high temperature and/or too much detergent, which can cause etching on crystal; wash crystal at a low temperature and with a conservative amount of detergent and contact the detergent manufacturer.
V
Valerie LandryAug 28, 2025
How to improve drying in Hisense HUI6220XCUS?
- M
  Michael FosterAug 28, 2025
  If your dishes aren't drying properly in your Hisense dishwasher: * Ensure the Door Open option is activated. * Make sure the dishwasher is fully loaded. * Check if the rinse aid needs topping up or if the dosage is set too low; top up the rinse aid or increase the dosage.
W
William ThomasAug 29, 2025
Why does my Hisense Dishwasher smell bad?
- S
  Suzanne WalkerAug 30, 2025
  A bad odor in your Hisense dishwasher may be caused by: * Dirt around the seals and in corners; clean with a dish brush and low foaming cleaner. * Low temperature programs being selected for a prolonged period; run a program with a higher temperature about once a month or select the self-cleaning program.
K
Kathy MannAug 31, 2025
Why don't the buttons react on my Hisense HUI6220XCUS?
- R
  Ralph MccarthyAug 31, 2025
  If the buttons on your Hisense dishwasher aren't responding: * You may have pressed the buttons too soon after opening the door; wait a moment and try again. * The buttons might be dirty; clean them with a dry or slightly damp cloth. * Ensure the door is open, as the buttons only react when the door is open.
K
kristen77Sep 2, 2025
What causes a sticky white/blue film on dishes in my Hisense HUI6220XCUS Dishwasher?
- K
  Kimberly OrtizSep 2, 2025
  A sticky white/blue film on dishes from your Hisense dishwasher is likely because the rinse aid dosage setting is too high; reduce the amount, and if you have very soft water, consider diluting the rinse aid 50:50 with water.
B
Brooke RollinsSep 4, 2025
How to remove spots left after washing in Hisense Dishwasher?
- S
  Shelly BowersSep 4, 2025
  If there are spots left after washing in your Hisense dishwasher, it could be because lipstick and tea can be difficult to wash off; use a detergent with a bleaching agent.
J
Jessica MorganSep 5, 2025
Why is there detergent residue in my Hisense HUI6220XCUS Dishwasher after washing?
- K
  Katherine BrockSep 5, 2025
  If you find detergent residue in the detergent compartment of your Hisense dishwasher after washing, it's likely because the compartment was damp when you added the detergent; ensure the detergent compartment is dry when adding detergent.
M
Miranda DrakeSep 7, 2025
Why is my Hisense HUI6220XCUS making a rattling sound?
- D
  Donald GonzalezSep 7, 2025
  A rattling sound during dishwashing in your Hisense dishwasher indicates that the dishes are not correctly placed or the spray arms are not rotating; check that the dishes are placed securely and spin the spray arms to ensure they can rotate.

Hisense HUI6220XCUS Specifications

General

Style	Built-In
Color	Stainless Steel
Load Capacity	14 Place Settings
Number of Cycles	5
Cycle Selections	Normal 65°
Options/Settings	4: Intensive Zone
Drying Type	Condensation Drying
Temperature Options	127-150 °F
Noise level	47 dB(A)
Special Features	Digital Leak Sensor
Energy Class	-
Annual Energy Consumption	269 kWh
Energy Consumption Per Cycle	-
Annual Water Consumption	-
Water Consumption Per Cycle	13.2 L
Voltage	-
Frequency	-
Current	-