EasyManuals Logo

Hisense HUI6220XCUS User Manual

Hisense HUI6220XCUS
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Troubleshooting
ActionType of fault on the display
Clear the drain pump. See the chapter Care and maintenance instructions. If the
problem persists, call the Customer Care Center.
OverfillingF10
See “Water remains in the dishwasher above the filters” in the table “Problem”
below. If the problem persists, call the Customer Care Center.
Water outlet faultF11
Check that the water supply valve is on. If the problem persists, call the Customer
Care Center.
Water inlet faultF12
Turn off the water supply valve and call the Customer Care Center.Inlet valve leakageF40
Clean the coarse and fine filters. If the problem persists, call the Customer Care
Center.
Water level faultF52
Turn off the water supply valve and call the Customer Care Center.OverfillingF54
Call the Customer Care Center.Circulation faultF56
Press any button to clear the error message.
ActionPossible causesProblem
Wait a moment then try again.You have pressed the buttons too soon
after opening the door.
The buttons do not react when pressed.
Clean with a dry or slightly damp cloth.The buttons are dirty.
Open the door. The buttons only react
to use when the door is open.
The door is closed.
Check that the baskets are correctly po-
sitioned horizontally.
The baskets are not correctly positioned.Cannot close door.
Check that the dishes are not blocking
the baskets from sliding properly into
place.
Check the door lock. If it does not click
into place, open the door. Press and
hold the button for the Door Open option
for 15 seconds. Then wait 30 seconds.
Close the door. Check that the door lock
clicks into place.
The door lock does not click into place
and lock.
14

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hisense HUI6220XCUS and is the answer not in the manual?

Hisense HUI6220XCUS Specifications

General IconGeneral
StyleBuilt-In
ColorStainless Steel
Load Capacity14 Place Settings
Number of Cycles5
Cycle SelectionsNormal 65°
Options/Settings4: Intensive Zone
Drying TypeCondensation Drying
Temperature Options127-150 °F
Noise level47 dB(A)
Special FeaturesDigital Leak Sensor
Energy Class-
Annual Energy Consumption269 kWh
Energy Consumption Per Cycle-
Annual Water Consumption-
Water Consumption Per Cycle13.2 L
Voltage-
Frequency-
Current-
Weight and Dimensions IconWeight and Dimensions
Depth22.8 in
Height33.74 in
Width23.8 in
Net Weight64.2 lbs

Related product manuals