What does F54 mean on a Hisense HV673B60?
If your Hisense Dishwasher displays error code F54, it means there's overfilling water. Turn off the water tap and contact your nearest service centre. To avoid water leakage outside the dishwasher, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
What to do if the Hisense HV673B60 Dishwasher control panel does not react?
If the control panel of your Hisense Dishwasher isn't responding, there might be a few reasons. First, if you've just opened the door, give it a moment before pressing any buttons. The control panel only works when the door is open. Second, ensure the door is open. Finally, the control panel might be dirty; try cleaning it with a dry or slightly damp cloth.
What to do if my Hisense HV673B60 Dishwasher shows F12?
If your Hisense Dishwasher displays the error code F12, it indicates a water inlet fault. First, ensure that the water tap is turned on. Next, check the outer filter on the inlet hose for any blockages. See Unblocking the inlet hose filter in the chapter Care and cleaning. If the issue continues, it is recommended to contact your nearest service center.
What to do if my Hisense Dishwasher shows F67?
If your Hisense Dishwasher displays the error code F67, it indicates a water inlet fault. First, ensure that the water tap is turned on. Next, check the outer filter on the inlet hose for any blockages. See Unblocking the inlet hose filter in the chapter Care and cleaning. If the issue continues, it is recommended to contact your nearest service center.
What to do if my Hisense HV673B60 shows F52?
If your Hisense Dishwasher displays the error code F52, it indicates a water level fault. You should clean the coarse and fine filters. Also, check the outer filter on the inlet hose to make sure it is not blocked. If the problem continues, contact your nearest service centre.
What does F10 mean on a Hisense Dishwasher and how to fix it?
The F10 error code on your Hisense Dishwasher indicates overfilling water. Unblocking the drainage pump. See the chapter Care and cleaning. If the problem persists, contact your nearest service centre.
Why can't I close the door on my Hisense HV673B60 Dishwasher?
If you're having trouble closing the door of your Hisense Dishwasher, it might be because the baskets are not correctly positioned. Check that the baskets are correctly positioned horizontally.
What does F40 mean on a Hisense HV673B60 Dishwasher?
The F40 error code on your Hisense Dishwasher indicates an inlet valve leakage. Turn off the water tap and contact your nearest service centre.
What does F41 mean on a Hisense HV673B60 Dishwasher?
The F41 error code on your Hisense Dishwasher indicates a heater fault. Turn off the water tap, remove the plug from the wall socket and contact your nearest service centre.
Understand water hardness levels and their impact on dishwashing performance.
Configure essential settings like rinse aid, water hardness, and detergent type.
Guidance on proper dish placement for optimal washing and drying.
Choosing the right wash program and optional settings for your needs.
Guide to connecting the dishwasher to your wireless network and pairing with your device.
Resetting all dishwasher settings to their original factory values.
Steps to clear obstructions from the drainage pump.
Interpreting and resolving error codes displayed by the dishwasher.
Addressing common issues like unresponsive controls or door problems.
Essential safety precautions and guidelines for installing the dishwasher.
Instructions for connecting the dishwasher's drain hose to the plumbing.
Guide for connecting the dishwasher to the cold or hot water supply.
Information on connecting the dishwasher to the power supply.
General| Brand | Hisense |
|---|---|
| Model | HV673B60 |
| Category | Dishwasher |
| Language | English |
To Next Page