Hisense HV673C61UK User Manual (English)

Questions and Answers:

C
courtneyrossAug 8, 2025
Why is the control panel on my Hisense Dishwasher not working?
- B
  Benjamin FordAug 8, 2025
  If the control panel of your Hisense Dishwasher doesn't respond when pressed, it might be due to a few reasons. First, you may have pressed the control panel too soon after opening the door, so wait a moment and try again. Second, ensure the dishwasher door is open, as the control panel only works when the door is open. Finally, the control panel may be dirty, so clean it with a dry or slightly damp cloth.
T
Theresa FitzgeraldAug 13, 2025
What to do if my Hisense Dishwasher is overfilling?
- R
  Rebecca GeorgeAug 13, 2025
  If your Hisense Dishwasher is overfilling with water, clear the drainage pump. If the issue continues, it is recommended to turn off the water tap and contact your nearest service center to prevent water leakage. Remember, do not remove the plug from the wall socket until the water tap on the supply line has been turned off!
S
Sarah CrosbyAug 18, 2025
How to fix water inlet fault in Hisense Dishwasher?
- G
  Gabriel MeltonAug 18, 2025
  If your Hisense Dishwasher has a water inlet fault, start by checking that the water tap is turned on. Also, inspect the outer filter on the inlet hose to ensure it is not blocked. You can find instructions on how to unblock the inlet hose filter in the Care and cleaning chapter. If the problem continues, it is recommended to contact your nearest service center.
D
Donna MccoyAug 23, 2025
What to do if Hisense HV673C61UK Dishwasher has water level fault?
- O
  oliverkellyAug 23, 2025
  If your Hisense Dishwasher has a water level fault, clean the coarse and fine filters. Also, check that the outer filter on the inlet hose is not blocked. If the problem persists, contact your nearest service centre.
J
jacqueline38Aug 28, 2025
What to do if Hisense HV673C61UK has inlet valve leakage?
- A
  ayoderAug 28, 2025
  If there is an inlet valve leakage in your Hisense Dishwasher, turn off the water tap and contact your nearest service centre.
E
egutierrezSep 2, 2025
What to do if Hisense HV673C61UK Dishwasher shows heater fault 1?
- J
  joshuamooreSep 2, 2025
  If your Hisense Dishwasher indicates a heater fault 1, turn off the water tap, remove the plug from the wall socket, and contact your nearest service centre.

Hisense HV673C61UK Specifications

General

Type	Freestanding
Appliance placement	Freestanding
Energy Efficiency Class	C
Number of Washing Programs	6
Height	85 cm
Width	60 cm
Control type	Buttons
Built-in display	Yes
Tub material	Stainless steel
Inlet hose	Yes
Outlet hose	Yes
Delayed start timer	Yes
Delay start (max)	24 h
AquaStop function	Yes
Child lock	Yes
Energy consumption per 100 cycles	76 kWh
Half Load Option	Yes
Wash Programs	Auto, Eco, Glass, Intensive, Quick
Depth	60 cm
Drying system	Condensation