Hisense HUI6220XCUS User Manual

Settings
Open the settings menu:
First, open the door. Turn off the machine. Press and hold the main power switch until the display
lights up.
1.
Within 10 seconds:
- press the program button for Auto and the option button for Fast.
2.Auto + Fast
The display shows the settings menu (current setting and its currently set value).3.
(Exit the menu by browsing through the menu or pressing the main power switch.)
Navigate the settings menu:
Press to save the setting value and continue to the
next setting.
Current setting.
Current setting value.
Press to browse between setting values.
You can now adjust the following settings:
OptionsSettings
Rinse aid dosage setting.1:00 - 1:05Rinse aid1.
Increase the rinse aid dosage:
• If the dishes have water marks.
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Heavy foaming. If you have very soft water, the rinse
aid can be diluted 50:50 with water.
Pre-selected at factory: 05
The dishwasher uses a buzzer to indicate when a pro-
gram is finished or when a fault has occurred.
4:00 - 4:03Buzzer volume2.
11

Hisense HUI6220XCUS Specifications

General

Style	Built-In
Color	Stainless Steel
Load Capacity	14 Place Settings
Number of Cycles	5
Cycle Selections	Normal 65°
Options/Settings	4: Intensive Zone
Drying Type	Condensation Drying
Temperature Options	127-150 °F
Noise level	47 dB(A)
Special Features	Digital Leak Sensor
Energy Class	-
Annual Energy Consumption	269 kWh
Energy Consumption Per Cycle	-
Annual Water Consumption	-
Water Consumption Per Cycle	13.2 L
Voltage	-
Frequency	-
Current	-

Weight and Dimensions

Depth	22.8 in
Height	33.74 in
Width	23.8 in
Net Weight	64.2 lbs