HISON WATERCRAFT
37
Securing the Crosski to a trailer
Always use a trailer that is suitable for the size of the Crosski. Position the Crosski so that all
wheels are completely on trailer and apply the parking brake.
Secure the front of the Crosski using a ratcheting type tie-down strap attached to the front
eyelet.
NOTICE: excessive force used to secure the Crosski could damage the front eyelet or hull.
The rear of the Crosski should be secured using a ratcheting type tie-down strap attached to each
rear plate.
NOTICE: for attaching tie-down straps to the Crosski attaching straps to the chassis, suspension or
other parts of the body can damage the Crosski.
To avoid damage:
Ensure that metal parts on tie-down straps, do not contact the Crosskis painted surfaces or
the face of any wheels.
Do not place straps over or through the Crosski’s body panels
To Previous Page
Loading...