EasyManua.ls Logo

Hisonic HS233 - Functional Descriptions; ECHO Effect; TONE Effect; Use the Wired Microphone On the Smart Mixer

Default Icon
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
lil-nqnrgt
H5223,UHF Duai Wiretess Microphone
Mixer with Bluetooth
connection
user's
Ma nual
5. ECHO Effect
To adjust
the echo effect, turn
this knob to
get
the best
echo depth.
7. TONE Effect
This
knob is used to change
the tone of the audio
output.
8. Use the
Wired M,icrophone On
the Smart Mixer
HS223 has capability
of using two
wired microphones, it has two RCA
microphone
jacks,
you
can
plug
in the two O74"
audio
cable wired
microphone at the same time.
The output volume is
controlled by Volume A and
Volume B knobs.
9. Use the HDMI
Input and Output
Functions
This
system is built with
HDMI
port,
one input and one
output,
you
can connect
the video source via HDI\4I cable
to this
HS223. then,
connect HDMI output to a
TV. The audio ofthe HDMI
will be mixed with microphone
sound and the mixed
sound
will be output through
the H5223 audio outputjack,
the outputjack
is
@3.5mm
audio
jack.
The
@3.5mm
cable
will be connected
with an amplifier
or an active speaker.
@
Note: The HS223
smart mixer's retail
package
does not contain
any HDMI cables. and
No wired microPhone
is
included
either.
10. Use the Line-inJack
You can use
this line
jack
to input
your music from
your
cellphone,
MP3
player
or other sound
sources like iPad, iPod.
The Line-in music will be mixed
with the miciophone
sound and'6ut
put-the
Hs223 outputjack, the
input and output
are both @3.5mmjacks.
The outputjack
can be connected
to an amplifier or active
speaker.
@il
Please
read all operating
instructions before
using the equipment.
'Tp
reduce
the risk of electric
shock, do not open
the Unit. Any service
should be done by a
qualified
technician.
Do not expose
this unit to
direct sunlight or
sources of extreme
heat.
clean only with a
damp cloth and avoid
using solvents or
dtergents.
Do not expose the
unit to rain or moisture.
Make sure other
equipments
are turned off and
volume levels
set down When connecting
these
equipments to this
system or before
turning it back on
again.
This system
can not accept amplified
signals. All
input sources need to be
at line level.
Ifyou
have any
question, please
do call us for advice
before
you
return
it or open the system.
Do
not
placed
the equipment
in water,
or close to fire.
Please
do not allow children
access to the equipment.