Hitachi 55R7 - More Settings; Changing Network Settings; Changing Caption Settings

53
More settings
This secon describes the features and sengs of the TV that were not covered in the other parts of this guide.
Changing network settings
If needed, you can change your network sengs at any me. For example, if you change the name of your wireless
network (its SSID) or its password, you will need to change your TV’s sengs so that it can connue to connect. Also, if
you decided not to connect to the Internet in “Guided Setup” on page 10, you can use Network sengs to connect at
a later me.
To change network sengs, from the  screen menu, navigate to , and then press the RIGHT
arrow. At this point, you can choose the following opons:
•  – Select your exisng network connecon type ( or ), and then press OK to
start the update process. The TV uses your current network informaon to reconrm the wireless or wired net-
work connecon, the local network connecon, and the Internet connecon.
•  – Select a dierent network connecon types ( or ), and then select the
opon to set up a new connecon. Follow the on-screen instrucons to complete the network connecon. For
help with seng up a new connecon, see “Seng up your TV” on page 11.
Note: Some networks, such as those found in dorm rooms, hotels, and other public places, may require
you to read and agree to terms, enter a code, or provide idenfying informaon before leng you con-
nect to the Internet. If the TV detects that you are connecng to such a network, it prompts you through
the connecon process using your smartphone or tablet to provide the needed informaon. For more
informaon, see “Using your TV in a hotel or dorm room” on page 33.
Changing caption settings
You can change many dierent sengs that aect the appearance of capons.
To change capon sengs, from the  screen menu, navigate to , and then press the RIGHT
arrow. At this point, you can choose the following opons:
•  – Choose , , .
o If you choose , the TV displays capons whenever they are available in the program informaon. This
seng applies to Antenna TV, the AV input, and streaming channels.
o If you choose , the TV displays capons only during a replay operaon; that is, aer press-
ing to jump back a few seconds in streaming video. This seng applies only to streaming channels
when the program being streamed supports instant replay.
o If you choose , the TV displays capons only when the sound is muted. This seng applies to
Antenna TV, the AV input, and streaming channels.
 If is not available on your remote control, you can use on the Roku App or the Jump Back
buon on a universal remote. For more informaon, see “Other devices” on page 62.