Hitachi B13F User Manual

HITACHI
Model
Modèle
Modelo
B13F
Bench Drill Press
Perceuse d’établi
Prensa Taladradora de Banco
INSTRUCTION MANUAL AND SAFETY INSTRUCTIONS
WARNING
Improper and unsafe use of this power tool can result in death or serious bodily injury!
This manual contains important information about product safety. Please read and understand
this manual before operating the power tool. Please keep this manual available for others
before they use the power tool.
Hitachi Koki
MANUEL D’INSTRUCTIONS ET CONSIGNES DE SÉCURITÉ
AVERTISSEMENT
L’utilisation inadéquate et non sécuritaire de cet outil électrique peut entraîner la mort ou des
blessures graves! Ce manuel contient des informations importantes sur la sécurité. Veuillez
lire et comprendre ce manuel avant d’utiliser l’outil électrique. Veuillez garder ce manuel
disponible pour les autres utilisateurs, avant qu’ils utilisent cet outil électrique.
MANUAL DE INSTRUCCIONES E INSTRUCCIONES DE SEGURIDAD
ADVERTENCIA
¡El uso inadecuado y no seguro de esta herramienta eléctrica puede ocasionar la muerte o
lesiones corporales graves! Este manual contiene información importante sobre la seguridad
del producto. Por favor lea y entienda este manual antes de usar la herramienta eléctrica.
Por favor mantenga disponible este manual para que otros puedan leerlo antes de usar la
herramienta eléctrica.

Hitachi B13F Specifications

General

Brand	Hitachi
Model	B13F
Category	Power Tool
Language	English

Summary

Instruction Manual and Safety Instructions

Safety Warning

Improper and unsafe use of this power tool can result in death or serious bodily injury!

Product Specifications

Electrical Safety Precautions

Circuit Protection Requirements

Use a separate 115V, 15 AMP circuit with time delay fuse or breaker to avoid electrical hazards.

General Safety Instructions

Pre-Operation Safety Checks

Guidelines for checking guards, removing wrenches, and keeping the work area clean and safe.

Safe Tool Operation Practices

Advice on proper apparel, eye protection, not forcing the tool, and using extension cords.

Specific Safety Instructions

Drill Press Usage Guidelines

Instructions on intended use, avoiding improper accessories, and securing the workpiece.

Operational Safety Checks

Ensuring proper speed, stopping the spindle, and avoiding accidental starts.

Electrical Requirements and Grounding

Power Supply Specifications

Details on voltage, amperage, and circuit requirements for the drill press.

Grounding Instructions

Critical information on proper grounding to protect the operator from electrical shock.

Assembly and Adjustments

Assembly Instructions

Step-by-step guide for assembling the drill press, including tools needed and safety warnings.

Assembly Procedures

Installing the Chuck

Steps for securely installing the drill chuck onto the spindle, including cleaning precautions.

Drill Press Adjustments

Belt Tension Adjustment

Laser Guide Safety and Alignment

Laser Guide Safety Warnings

Operation

Basic Operations and Speed Settings

Switch and Drill Bit Installation

How to use the on/off switch and correctly install a drill bit into the chuck.

Specific Drilling Procedures

Specific Depth Drilling

Instructions for setting depth stops and locking the chuck for precise hole depths.

Workpiece Handling and Chuck Removal

Workpiece Support and Securing

Workpiece Positioning and Feeding

Table and Workpiece Placement

Drilling Speed and Feeding

Maintenance and Battery Care

Troubleshooting Guide

Common Operation Issues

Quill, Chuck, and Laser Issues