Hitachi CN 16SA User Manual

Nibbler
Model CN 16SA
Handling instructions
Note:
Before using this Electric Power Tool, carefully read through these
HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available
as an important reference when using this power tool.
001Cover_CN16SA_Eng 4/20/09, 18:131

Hitachi CN 16SA Specifications

General

Type	Nibbler
Capacity Steel	1.6 mm
Capacity Stainless Steel	1.2 mm
Minimum Cutting Radius	40 mm
Weight	1.6 kg
No-Load Speed	2300/min
No Load Speed	2300/min

Summary

General Power Tool Safety Warnings

Work Area Safety

Maintain a clean, well-lit work environment and keep bystanders away.

Electrical Safety

Ensure proper grounding, avoid wet conditions, and protect cords from damage.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, and avoid loose clothing.

Precautions on Using Nibbler

Sharp Panel Edges

Be aware of sharp edges created by the nibbler, handle with care to avoid cuts.

Shavings Management

Prior to Operation

Cutting

Cutting Corrugated and Trapezoidal Plates

Replacing Punch and Die

Service Life of Punch and Die

Understand the service life of punch and die for optimal cutting.

Punch and Die Replacement

Follow steps to replace punch and die, ensuring proper alignment and tightening.

Maintenance and Inspection

Checking Punch and Die