Hitachi CJ110MV User Manual

DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et propriétaires
avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé dans un
endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should
be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
Model Jig Saw
Modèle Scie sauteuse
Modelo Sierra de calar
CJ110MV
CJ 110MV

Hitachi CJ110MV Specifications

General

Power source	AC

Summary

IMPORTANT SAFETY INFORMATION

MEANINGS OF SIGNAL WORDS

Explains the meaning of signal words used in the manual for hazard identification.

SAFETY

GENERAL SAFETY RULES

Provides essential rules for safe operation of power tools.

Personal Safety

Outlines precautions for operator's personal safety during use.

Tool Use and Care

Details proper methods for using and maintaining the tool.

Service

Specifies requirements for tool servicing and repairs.

SPECIFIC SAFETY RULES AND SYMBOLS

Lists specific safety rules and symbols relevant to the tool.

Definitions for symbols used on this tool

Clarifies the meaning of various symbols found on the tool.

DOUBLE INSULATION FOR SAFER OPERATION

Explains the double insulation feature for enhanced user safety.

FUNCTIONAL DESCRIPTION

NAME OF PARTS

Identifies and labels the different parts of the power tool.

SPECIFICATIONS

Lists the technical specifications of the power tool.

ASSEMBLY AND OPERATION

APPLICATIONS

Outlines the various tasks and materials the tool can be used for.

PRIOR TO OPERATION

Details essential checks and preparations before operating the tool.

Changing blades

Step-by-step guide on how to replace the cutting blade.

Adjusting the blade operating speed

Instructions on how to set the variable speed control for cutting.

Adjusting the orbital operation

Guide to adjusting the orbital action for different cutting tasks.

Cutting stainless steel plates

Specific advice for cutting stainless steel materials.

Splinter guard

Information on using the splinter guard accessory.

Chip cover

Instructions for attaching and using the chip cover.

Sub base

Details on the use of the sub base accessory.

Lighting up the lamp

How to operate the tool's integrated work light.

CUTTING

Rectilinear cutting

Method for making straight line cuts with the tool.

Sawing curved lines

Techniques for cutting along curved paths.

Cutting a circle or a circular arc

How to perform circular cuts using the guide.

Cutting metallic materials

Specific settings and advice for cutting metal.

Pocket cutting

Instructions for making internal cuts (pocket cuts) in materials.

Angular cutting

How to perform cuts at an angle using the base adjustment.

CONCERNING CUTTING OF STAINLESS STEEL PLATES

Detailed advice for cutting stainless steel plates.

Adjust the speed

Guidance on adjusting the speed for stainless steel cutting.

Set the orbital position to "0"

Setting the orbital action for stainless steel cutting.

SELECTION OF BLADES

Guidance on choosing the correct blade for different materials.

HOUSING THE ALLEN WRENCH

Information on storing the allen wrench on the tool.

CONNECTING WITH CLEANER

Instructions for connecting a dust collection system.

MAINTENANCE AND INSPECTION

Inspecting the drill bits

Advice on checking and maintaining cutting bits.

Inspecting the screws

Importance of checking and tightening all screws.

Maintenance of the motor

Precautions for motor maintenance and care.

Service and repairs

Guidelines for professional servicing and repair of the tool.

Service parts list

Reference for identifying replacement parts.

ACCESSORIES

STANDARD ACCESSORIES

Lists accessories included with the tool.

OPTIONAL ACCESSORIES

Lists accessories available for separate purchase.