Hitachi CJ 120V - User Manual

DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles!
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et propriétaires
avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé dans un
endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should
be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede
resultar en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
Model Jig Saw
Modèle Scie sauteuse
Modelo Sierra de calar
CJ120V CJ120VA
CJ 120V • CJ 120VA

Summary

Important Safety Information

Meanings of Signal Words

Explains the meaning of WARNING and CAUTION signals.

Safety

General Safety Rules

General guidelines for safe operation, work area, electrical safety, and personal safety.

Specific Safety Rules and Symbols

Detailed safety rules and symbols to avoid hazards.

Assembly and Operation

Prior to Operation

Changing Blades

Adjusting the Blade Operating Speed

Adjusting the Orbital Operation

Cutting

Rectilinear Cutting

Guidance for making straight cuts using the guide.

Sawing Curved Lines

Cutting a Circle or a Circular Arc

Cutting Metallic Materials

Specific settings and fluids for cutting metal.

Pocket Cutting

Angular Cutting

How to adjust the base for angled cuts up to 45 degrees.

Concerning Cutting of Stainless Steel Plates

Adjust the Speed

Set the Orbital Position to “0”

Maintenance and Inspection

Hitachi CJ 120V Specifications

General

Type	Jigsaw
Voltage	120V
Stroke Length	1 inch
Bevel Capacity	45 Degrees
Category	Power Tool
Strokes per Minute	850 - 3, 000