To Next PageTo Next Page
Need help?Do you have a question about the Hitachi C 13U and is the answer not in the manual?
Adjusts the cutting depth by loosening clamp lever and shifting the base. Scale marks are for reference.
Installs the riving knife to the arm securely with attached bolts.
Adjusts the riving knife position using hexagon head bolts, ensuring movement with cutting depth.
Tilts the saw blade to a maximum of 45° by loosening wing bolts.
Adjusts the cutting position by moving the guide left or right after loosening its wing bolt.
Removes the saw blade by setting cutting depth, locking spindle, and loosening bolts.
Attaches the saw blade by cleaning spindle, using correct washers/adapter rings, and tightening bolts.
Checks saw blade for dullness; resharpen or replace for efficiency and to prevent motor malfunction.
Regularly checks and tightens all mounting screws for safety and proper operation.
Checks carbon brushes for wear, replaces them to prevent motor trouble when worn.
Removes carbon brushes by disassembling brush caps with a screwdriver.
Protects the motor unit winding from damage by oil or water.
General
