EasyManuals Logo

Hitachi C 6 User Manual

Hitachi C 6
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
5
English
PRECAUTIONS ON USING CIRCULAR SAW
1. Proceed with cutting operation when full speed has been
reached.
2. Never use the circular saw with its lower guardxed
open.
3. Ascertain that lower guard moves smoothly.
4. Never lay down the circular saw while the saw blade is
revolving.
5. Turn OFF the switch immediately when
a fault occurs.
6. Never operate circular saw with its saw blade turned
upward.
7. Cutting glassber is not recommended.
8. Do not use the saw blade of which the diameter at the
end of the teeth is less than 134 mm (C6) or 162 mm
(C7).
9. Always keep
the saw blade sharp.
10. Ascertain that the workpiece is free of foreign matter
such as nails.
11. Exercise care to position the circular saw at a safe, stable
spot when sawing.
SPECIFICATIONS
Model C6 C7
Voltage* (110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
Power Input* 670 W 1050 W
Max. Cutting Depth 55 mm 65 mm
Saw Blade: external diam.
160 mm 185 mm
thickness 1.05 mm 1.25 mm
internal diam. 19 mm 19 mm
No-load Speed 4700 / min
Weight (without cord) 3.1 kg 3.9 kg
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES
(1) Combination Saw Blade (Monted to the tool) ................1
(2) Box Wrench ..................................................................1
(3) Guide .... .......................................................................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Side Handle Set (for only C7)
1 Side Handle ..................................................................1
2 Plate ..........................................................................1
3 Spring Lock Washer (for M10) ......................................1
4 M10 Hexagon Cap Nut .................................................1
5 M5×12
Hd. Machine Screw .....................................2
(w/washer)
(Attached condition)
Combination Saw Blade
2. Combination Saw Blade (for only C7)
Application: Cutting various types of wood
Size:
185 mm external diam. × 1.25 mm thickness
000BookC6KoT.indb5000BookC6KoT.indb5 2011/08/1810:24:552011/08/1810:24:55

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hitachi C 6 and is the answer not in the manual?

Hitachi C 6 Specifications

General IconGeneral
BrandHitachi
ModelC 6
CategorySaw
LanguageEnglish

Related product manuals