28
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
Item Description
Schedule Click the [Enable] check box to enable the schedule.
Date (Month/Day)
Configures the month and date.
This item appears only when Specific date (No. 1-5) is
selected.
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item Description
Time Configures the time to execute commands.
Command
[Parameter]
Configures the commands to be executed.
Power Configures the parameters for power control.
Input Source Configures the parameters for input switching.
My Image
Configures the parameters for My Image data display. (
50)
Messenger Configures the parameters for Messenger data display. (
51
)
Slideshow Configures the Start/Stop parameters for the Slideshow.
Click the [Register] button to add new commands to the schedule list.
Click the [Delete] button to delete commands from the schedule list.
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
3. Web Control
To Next Page
Loading...
Need help?
General