What to do when I see a precaution note when cleaning the air filter of my Hitachi CP-AW100N?
If you're getting a note of precaution when cleaning the air filter on your Hitachi Projector, immediately turn the power off. Clean or change the air filter. After cleaning or changing the air filter, reset the filter time.
What to do if my Hitachi Projector's interior temperature is too high?
If your Hitachi Projector's interior temperature is too high, or has rapidly changed, turn the power off. Let the projector cool down for at least 15 minutes before turning it back on.
How to fix no input signal on Hitachi CP-AW100N Projector?
If your Hitachi Projector shows no input signal, check the signal input connection and the signal source's status.
What to do if my Hitachi CP-AW100N displays an improper signal?
If your Hitachi Projector displays an improper signal, check the projector's specs or the signal source specs to ensure compatibility.
General| Contrast Ratio | 2000:1 |
|---|---|
| Display Type | 3LCD |
| Resolution | 1280 x 800 (WXGA) |
| Lamp Life | 3000 hours (Eco Mode) |
| Lamp Type | UHP |
| Image Size | 30 - 300 inches |
| Input Terminals | HDMI, VGA, Composite Video, S-Video |
| Output Terminals | VGA |
| Noise Level | 28 dB (Eco Mode) |
To Next Page
