To Next PageTo Next PageWhat to do if the internal temperature is rising in my Hitachi CP-AX3505 Projector?
If the internal temperature of your Hitachi Projector is rising, turn the power off and allow the projector to cool down for at least 15 minutes.
What to do if the lamp doesn't light in my Hitachi CP-AX3505 and it may be overheating?
If the lamp does not light and the interior of your Hitachi Projector may be overheated, turn the power off and allow the projector to cool down for at least 15 minutes.
What to do if the cooling fan is not operating in my Hitachi Projector?
If the cooling fan is not operating in your Hitachi Projector, turn the power off and allow the projector to cool down for at least 15 minutes.
What to do if the button operation is not available on my Hitachi Projector?
If button operation is not available on your Hitachi Projector, turn on the POWER indicator.
How to troubleshoot no input signal on Hitachi Projector?
If your Hitachi Projector shows no input signal, confirm the signal input connection and the status of the signal source.
What to do if the frequency of the input signal is not within range on my Hitachi CP-AX3505?
If the horizontal or vertical frequency of the input signal is not within the specified range for your Hitachi Projector, confirm the specs for your projector or the signal source specs.
What to do if an improper signal is input to my Hitachi CP-AX3505?
If an improper signal is input to your Hitachi Projector, confirm the specs for your projector or the signal source specs.
What does it mean when my Hitachi Projector is in an on state?
Ordinary operations may be performed if your Hitachi Projector is in an on state.
General| Placement | Ceiling |
|---|---|
| Product type | Ultra short throw projector |
| Product color | White |
| Number of colors | 16.78 million colors |
| Projection technology | - |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 60 - 100 \ |
| Projector native resolution | XGA (1024x768) |
| Projector brightness (economic mode) | 2214 ANSI lumens |
| Focus | Auto |
| Digital zoom | 1.35 x |
| Focal length range | - mm |
| Lamp power | 250 W |
| Light source type | Lamp |
| Service life of light source | 4000 h |
| Service life of light source (economic mode) | 5000 h |
| Full HD | No |
| Supported video modes | 480i, 480p, 576i, 720p, 1080i, 1080p |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM |
| PC in (D-Sub) | Yes |
| Serial interface type | RS-232C |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Noise level | 36 dB |
| Certification | UL/CUL, FCC PART15 CLASS B, AS/NZS CISPR22 CLASS B, CE, ROHS, GOST-R |
| Noise level (economic mode) | 29 dB |
| Operating temperature (T-T) | 0 - 40 °C |
| Power source | AC |
| AC input voltage | 220 - 240 V |
| Power consumption (standby) | 0.35 W |
| Power consumption (typical) | 350 W |
| Sustainability certificates | RoHS |
| RMS rated power | 16 W |
Weight and Dimensions| Depth | 360 mm |
|---|---|
| Width | 377 mm |
| Height | 136 mm |
| Weight | 4300 g |
Instructions for connecting external sources and the power supply.
Step-by-step guide to powering on the projector and initial setup.
Correct procedure for safely powering down the projector.
Settings for zoom, focus, keystone, and position.
Guide to accessing and using the projector's on-screen menus.
Covers aspect ratio, D-ZOOM, keystone, picture mode, and ECO settings.
Connecting and using the projector with Windows and Mac computers.
Step-by-step guide for replacing the projector lamp safely.
Instructions for cleaning the air filter and projection window.
Interpreting on-screen messages and status indicator lights.
Diagnosing and fixing problems like no power, no picture, or remote issues.
