Hitachi CP-AW2519N - Editing Profile Data

35
If necessary, the profile data can be edited on
the Manual Configuration screen. (
24)
1) Select
the [Profile], and select one of the
data listed in the window.
2) Click the [Edit].
3) The “Edit profile” screen will come up.
4) Edit the information required to be revised.
If you want to clear all information in the
window, click
the [Clear].
5) Click
the [OK], after the editing is completed.
If you don’t want to store it, click the [Cancel].
1.9.3 Editing Profile data
6) The edited profile data is stored and shown
in the profile list with the new date created
information, if you click
the [OK].
• When you edit a profile data, it is strongly recommended to check
that the edited data can work properly by selecting the data at the Profile
connection. (
24)
NOTE
1.9 Profile data (continued)
1. Connection to the network