Hitachi CP-S830W User Manual

CP-S830W
CP-S830E
3. Names of each part
@Main unit @Operation section
momma MENU button
Picture adjustments.
ea
RESET button
Resets unit to factory settings.
~~ INPUT button
F To select the input source.
: Each time this button is pressed, the input
source is changed in sequence as shown
below.
MUTE
Button
cess
mma
|
RGB1—»
RGB2
—>
VIDEO1
—»
VIDEO?
A
Silences the sound. (Cancels the mute a
when the unit is set in mute mode.) _
LAMP indicator « ees TEMP indicator
This lights or blinks when the lamp does ‘ This lights or blinks when temperature
not light. Inside the projector 1s too high or when fan
is abnormal.
‘tie. ON ot]
See
LAMP
G)
TEMP
on™
“Bere © Q oval
STANDBY / ON DUttON om: me csmmromes
Power ON/OFF button.
OFF sets the unit in standby mode.
von ON indicator
This blinks in the standby mode and lights
in the operation mode.
STANDBY/ON
Speaker Speaker
|
ZOOM knob ...
Adjusts picture size. conser
Remote Control 2c
sensor
|
Ree
eee
eet
Cooling
fan
(exhaust)
Len
s
open
Lens
cap
—(Oy
* Handle
FOCUS knob
@Use the remote control transmitter within fleet ous:
the range of about 16 feet from the remote
control sensor and within 30° to both the
left and right.

Hitachi CP-S830W Specifications

General

Brand	Hitachi
Model	CP-S830W
Category	Projector
Language	English