EasyManua.ls Logo

Hitachi CP-SX1350 - User Manual

Hitachi CP-SX1350
65 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Projector
CP-SX1350
CP-SX1350
User's Manual - Operating Guide
User's Manual - Operating Guide
Thank you for purchasing this projector.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
WARNING Before using the product, please read the "User's Manual -
Safety Guide" and related manuals to ensure the proper use of this product.
After reading them, store them in a safe place for future reference.
I
N
T
E
R
I
N
P
U
T
M1
-
D
RGB
BNG
S
-VIDEO
S
T
ANDBY
/
O
N
T
E
MP
VIDE
O
C
OMPO
N
E
N
T
L
A
MP
KEYST
O
N
E
SEA
RCH
R
E
S
E
T
ME
N
U
FOCUS
LE
N
S
SHIF
T
Z
O
O
M
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transfer or copy of all or any part of this document is not permitted without
express written consent.
NOTE

Table of Contents

Other manuals for Hitachi CP-SX1350

Preview: Technical User's Manual
Technical User's Manual16 pages

Questions and Answers

  • D
    Dana WhiteAug 17, 2025
    Why won't my Hitachi Projector power on?
    • M
      Melanie YorkAug 17, 2025
      If your Hitachi Projector isn't powering on, there could be several reasons: * The power cord might not be correctly plugged in; ensure it is properly connected. * The power switch might not be in the on position; set it to the on position. * A power interruption may have occurred; turn the power off, let the unit cool for 20 minutes, then turn it back on. * The lamp or lamp cover might be missing or improperly fixed; turn the power off, let the unit cool for 45 minutes, check the lamp and lamp cover, then turn it back on.
  • N
    Nicolas JacobsAug 20, 2025
    Why does my Hitachi CP-SX1350 say 'Change the Lamp'?
    • J
      John AllenAug 20, 2025
      If your Hitachi Projector is telling you to change the lamp and reset the timer, it means the lamp timer is approaching 2000 hours. Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer.
  • H
    Heather GonzalezAug 22, 2025
    Why are there no sounds or pictures on my Hitachi CP-SX1350?
    • J
      Juan VanceAug 22, 2025
      If your Hitachi Projector is not displaying pictures or playing sound, check that the signal cables are correctly connected. Also, verify that the input changeover settings are correctly selected.
  • M
    Michelle CollinsAug 25, 2025
    How to fix dark pictures on Hitachi CP-SX1350?
    • L
      Lori MaloneAug 26, 2025
      If the pictures on your Hitachi Projector appear dark, try these solutions: * Adjust the BRIGHT and/or CONTRAST settings to a higher level using the menu function. * If the lamp is old, consider replacing the lamp, as it may be nearing the end of its lifespan.
  • M
    Michael GonzalesAug 27, 2025
    What to do if my Hitachi CP-SX1350 has sound but no picture?
    • M
      Michele DuncanAug 27, 2025
      If you hear sound but see no picture on your Hitachi Projector, ensure that the lens cap is removed. Also, check that the signal cables are correctly connected. Finally, adjust the BRIGHT setting to a higher level using the menu function.
  • S
    Stacey HooverAug 30, 2025
    Why are the pictures blurry on my Hitachi Projector?
    • C
      connie36Aug 30, 2025
      If the pictures on your Hitachi Projector appear blurry: * Adjust the focus using the focus buttons and/or adjust the H PHASE using the menu function. * If the lens is dirty or misty, clean the lens.
  • L
    Luis RossSep 1, 2025
    How to fix no sound on Hitachi CP-SX1350?
    • M
      Melanie LopezSep 1, 2025
      If your Hitachi Projector displays pictures but has no sound, ensure the signal cables are correctly connected. Also, check that the volume isn't set too low and that the sound isn't muted. Adjust the VOLUME to a higher level or press the MUTE button to restore the sound.
  • K
    Kristen MartinSep 4, 2025
    What to do if Hitachi CP-SX1350 says 'No Input'?
    • T
      Todd HenrySep 4, 2025
      If your Hitachi Projector displays 'NO INPUT IS DETECTED', confirm the signal input connection and the status of the signal source.
  • V
    Vicki TannerSep 6, 2025
    What to do if my Hitachi CP-SX1350 says 'Change Lamp' and will turn off after 0 hours?
    • E
      Ellen SummersSep 7, 2025
      If your Hitachi Projector displays a message to change the lamp and the power will turn off after 0 hours, immediately turn the power off. Change the lamp, and be sure to reset the lamp timer after.
  • N
    ntannerSep 9, 2025
    What to do if my Hitachi Projector says 'Change Lamp' and will turn off after some hours?
    • R
      Rachel BakerSep 9, 2025
      If your Hitachi Projector displays a message to change the lamp and that the power will automatically turn off after a certain number of hours, change the lamp. After you have changed the lamp, please be sure to reset the lamp timer.

Summary

Projector Features

Setting Up Your Projector

Arrangement and Placement

Connections and Power

Instructions for connecting devices and the power supply.

Remote Control Operations

Basic Remote Functions

Power ON;OFF Procedure

Powering On and Off

Step-by-step instructions for turning the projector on and off.

Operating the Projector

Signal and Picture Adjustments

Selecting inputs, aspect ratio, auto-adjust, position, and keystone correction.

Audio and Screen Control

Multifunctional Settings

Menu Navigation and Main Settings

Input, Auto, and Screen Settings

Network Setup Guide

Lamp Maintenance

Replacing the Lamp

Procedures and warnings for lamp replacement.

Air Filter Care

Troubleshooting and Error Messages

Understanding Messages and Indicators

Explains on-screen messages and indicator lamp meanings.

Non-Defect Issues

Port Connections

Hitachi CP-SX1350 Specifications

General IconGeneral
ResolutionXGA (1024 x 768)
Contrast Ratio2000:1
Display TypeLCD
Projection Technology3LCD
Throw Ratio1.5 - 1.8:1
Projection Size30 - 300 inches
Input PortsHDMI, VGA, Composite Video, S-Video
Output PortsVGA, Audio
Power Consumption240W (Eco mode)
Brightness3500 ANSI Lumens (Normal Mode)
Lamp Life5, 000 hours (Eco mode)

Related product manuals