Hitachi CP-SX1350 User Manual (English)

Other manuals for Hitachi CP-SX1350

Questions and Answers:

D
Dana WhiteAug 17, 2025
Why won't my Hitachi Projector power on?
- M
  Melanie YorkAug 17, 2025
  If your Hitachi Projector isn't powering on, there could be several reasons: * The power cord might not be correctly plugged in; ensure it is properly connected. * The power switch might not be in the on position; set it to the on position. * A power interruption may have occurred; turn the power off, let the unit cool for 20 minutes, then turn it back on. * The lamp or lamp cover might be missing or improperly fixed; turn the power off, let the unit cool for 45 minutes, check the lamp and lamp cover, then turn it back on.
N
Nicolas JacobsAug 20, 2025
Why does my Hitachi CP-SX1350 say 'Change the Lamp'?
- J
  John AllenAug 20, 2025
  If your Hitachi Projector is telling you to change the lamp and reset the timer, it means the lamp timer is approaching 2000 hours. Preparation of a new lamp, and an early lamp change is recommended. After you have change the lamp, please be sure to reset the lamp timer.
H
Heather GonzalezAug 22, 2025
Why are there no sounds or pictures on my Hitachi CP-SX1350?
- J
  Juan VanceAug 22, 2025
  If your Hitachi Projector is not displaying pictures or playing sound, check that the signal cables are correctly connected. Also, verify that the input changeover settings are correctly selected.
M
Michelle CollinsAug 25, 2025
How to fix dark pictures on Hitachi CP-SX1350?
- L
  Lori MaloneAug 26, 2025
  If the pictures on your Hitachi Projector appear dark, try these solutions: * Adjust the BRIGHT and/or CONTRAST settings to a higher level using the menu function. * If the lamp is old, consider replacing the lamp, as it may be nearing the end of its lifespan.
M
Michael GonzalesAug 27, 2025
What to do if my Hitachi CP-SX1350 has sound but no picture?
- M
  Michele DuncanAug 27, 2025
  If you hear sound but see no picture on your Hitachi Projector, ensure that the lens cap is removed. Also, check that the signal cables are correctly connected. Finally, adjust the BRIGHT setting to a higher level using the menu function.
S
Stacey HooverAug 30, 2025
Why are the pictures blurry on my Hitachi Projector?
- C
  connie36Aug 30, 2025
  If the pictures on your Hitachi Projector appear blurry: * Adjust the focus using the focus buttons and/or adjust the H PHASE using the menu function. * If the lens is dirty or misty, clean the lens.
L
Luis RossSep 1, 2025
How to fix no sound on Hitachi CP-SX1350?
- M
  Melanie LopezSep 1, 2025
  If your Hitachi Projector displays pictures but has no sound, ensure the signal cables are correctly connected. Also, check that the volume isn't set too low and that the sound isn't muted. Adjust the VOLUME to a higher level or press the MUTE button to restore the sound.
K
Kristen MartinSep 4, 2025
What to do if Hitachi CP-SX1350 says 'No Input'?
- T
  Todd HenrySep 4, 2025
  If your Hitachi Projector displays 'NO INPUT IS DETECTED', confirm the signal input connection and the status of the signal source.
V
Vicki TannerSep 6, 2025
What to do if my Hitachi CP-SX1350 says 'Change Lamp' and will turn off after 0 hours?
- E
  Ellen SummersSep 7, 2025
  If your Hitachi Projector displays a message to change the lamp and the power will turn off after 0 hours, immediately turn the power off. Change the lamp, and be sure to reset the lamp timer after.
N
ntannerSep 9, 2025
What to do if my Hitachi Projector says 'Change Lamp' and will turn off after some hours?
- R
  Rachel BakerSep 9, 2025
  If your Hitachi Projector displays a message to change the lamp and that the power will automatically turn off after a certain number of hours, change the lamp. After you have changed the lamp, please be sure to reset the lamp timer.

Hitachi CP-SX1350 Specifications

General

Resolution	XGA (1024 x 768)
Contrast Ratio	2000:1
Display Type	LCD
Projection Technology	3LCD
Throw Ratio	1.5 - 1.8:1
Projection Size	30 - 300 inches
Input Ports	HDMI, VGA, Composite Video, S-Video
Output Ports	VGA, Audio
Power Consumption	240W (Eco mode)
Brightness	3500 ANSI Lumens (Normal Mode)
Lamp Life	5, 000 hours (Eco mode)