How to cancel turning on network adapter on Hitachi CP-WX3011N Projector?
If you are asked whether you want to turn on the network adapter on your Hitachi Projector and you do not wish to proceed, click [No]. This will return you to the previous screen where you can select another network adapter. If there are no more adapters available, the “LiveViewer” will close.
What to do if my Hitachi CP-WX3011N shows no input signal?
If your Hitachi Projector displays no input signal, please verify the signal input connection and check the status of the signal source.
What to do if my Hitachi CP-WX3011N is waiting for an image file?
If the Hitachi Projector is waiting for an image file, check the hardware connection, the projector’s settings, and network-related settings. The computer-Projector network connection might be disconnected. Please re-connect using the 'Connect button' of 'LiveViewer'.
What to do if I see smoke or smell strange odors coming from my Hitachi CP-WX3011N Projector?
If you observe abnormal operations such as smoke, strange odors, excessive sound, damaged casing or elements or cables, or penetration of liquids or foreign matter, stop using the projector immediately and disconnect the power plug from the power outlet. After making sure that the smoke or odor has stopped, contact your dealer or service company.
Why does my Hitachi CP-WX3011N show an improper signal?
If an improper signal is input, please confirm the specs for your projector or the signal source specs.
How to fix horizontal or vertical frequency issues on my Hitachi CP-WX3011N Projector?
If the horizontal or vertical frequency of the input signal is not within the specified range, please confirm the specs for your projector or the signal source specs.
What to do if the USB TYPE B port is selected as the picture input source on my Hitachi CP-WX3011N Projector?
If the USB TYPE B port is selected as the picture input source even if MOUSE is selected for USB TYPE B, select USB DISPLAY in the dialog to project the picture input to the USB TYPE B port. In this case, you cannot use the simple mouse and keyboard function. Otherwise select other port for picture input.
General| Resolution | WXGA (1280 x 800) |
|---|---|
| Contrast Ratio | 2000:1 |
| Lamp Life (Eco Mode) | 6000 hours |
| Display Technology | 3LCD |
| Network | RJ-45 |
| Projection Size | 30 - 300 inches |
| Power Consumption (Normal Mode) | 280 W |
| Noise Level (Normal Mode) | 37 dB |
| Brightness | 3000 ANSI Lumens |
| Input Ports | HDMI, VGA, Composite Video, S-Video |
| Projection Lens | Manual zoom/focus |
| Throw Ratio | 1.5 - 1.8:1 |
| Video Compatibility | NTSC, PAL, SECAM |
| Input Terminals | HDMI, VGA, Composite Video, S-Video |
| Output Terminals | Audio |
| Aspect Ratio | 16:10 |
| Lamp Type | UHP |
To Next Page
