M
Maria BrownSep 9, 2025
What to do if an improper signal is input on Hitachi CP-WX3014WN?
- NNancy LoganSep 9, 2025
Please confirm the specs for your Hitachi Projector or the signal source specs.

What to do if an improper signal is input on Hitachi CP-WX3014WN?
Please confirm the specs for your Hitachi Projector or the signal source specs.
How to adjust brightness on Hitachi CP-WX3014WN Projector?
Adjust the brightness to a higher level using the menu function of your Hitachi Projector.
How to troubleshoot 'no input signal' on a Hitachi CP-WX3014WN?
If your Hitachi Projector shows 'no input signal,' verify that the signal input connection is secure and check the status of the signal source.
What to do if the electrical power cord is not plugged in Hitachi CP-WX3014WN?
Make sure to correctly connect the power cord to your Hitachi Projector.
What to do if input changeover settings are mismatched on Hitachi Projector?
Select the correct input signal on your Hitachi Projector and adjust the settings accordingly.
How to fix low volume on Hitachi CP-WX3014WN Projector?
Increase the volume using the menu function or the remote control of your Hitachi Projector.
How to resolve the same network address set for both wireless and wired LAN on Hitachi CP-WX3014WN?
Change the network address setting for wireless or wired LAN on your Hitachi Projector.
How to turn on NETWORK BRIDGE function on Hitachi CP-WX3014WN?
Select NETWORK BRIDGE for COMMUNICATION TYPE item in the OPTION - SERVICE - COMMUNICATION menu of your Hitachi Projector.
What to do if horizontal or vertical frequency of the input signal is not within the specified range for Hitachi CP-WX3014WN?
Please confirm the specs for your Hitachi Projector or the signal source specs.
How to disable the SAVING function on a Hitachi CP-WX3014WN?
Select NORMAL for STANDBY MODE item in the SETUP menu of your Hitachi Projector.
| Resolution | WXGA (1280 x 800) |
|---|---|
| Max Resolution | UXGA (1600 x 1200) |
| Display Type | LCD |
| Throw Ratio | 1.5 - 1.8:1 |
| Zoom Ratio | 1.2x |
| Aspect Ratio | 16:10 (Native), 4:3, 16:9 |
| Projection Size | 30 - 300 inches |
| Lamp Type | UHP |
| Brightness | 3000 ANSI Lumens |
| Contrast Ratio | 10000:1 |
| Connectivity | HDMI, VGA, USB, RS-232 |
| Keystone Correction | Vertical ±30°, Horizontal ±30° |
| Video Modes | NTSC, PAL, SECAM, 480i, 480p, 576i, 576p, 720p, 1080i, 1080p |
| Power Consumption | <0.5W (Standby) |
| Lamp Life | 4000 hours (Normal mode), 6000 hours (Eco mode) |
| Noise Level | 37dB (Normal Mode) / 29dB (Eco Mode) |












Loading...