Hitachi CP-WX3014WN - Page 28

28
3.1 Projector Web Control - Schedule Settings (continued)
The schedule settings are shown below.
Item Description
Schedule Click the [Enable] check box to enable the schedule.
Date (Month/Day)
Congures the month and date.
This item appears only when Specic date (No. 1-5) is
selected.
Click the [Apply] button to save the settings.
The current event settings are displayed on the schedule list. To add additional
functions and events, set the following items.
Item Description
Time Congures the time to execute commands.
Command
[Parameter]
Congures the commands to be executed.
Power Congures the parameters for power control.
Input Source Congures the parameters for input switching.
My Image
Congures the parameters for My Image data display. (
&50)
Messenger Congures the parameters for Messenger data display. (
&51
)
Slideshow Congures the Start/Stop parameters for the Slideshow.
Click the [Register] button to add new commands to the schedule list.
Click the [Delete] button to delete commands from the schedule list.
Click the [Reset] button to delete all commands and reset the schedule settings
from the schedule list.
3. Web Control