Hitachi CP-X4014WN User Manual

35
IMAGE menu
IMAGE menu
From the IMAGE menu, items shown in the table
below can be performed.
Select an item using the ▲/▼ cursor buttons, and
press the ► cursor button or ENTER button to
execute the item. Then perform it according to the
following table.
Item Description
ASPECT
Using the ▲/▼ buttons switches the mode for aspect ratio.
For a computer signal
CP-X2514WN, CP-X3014WN, CP-X4014WN:
NORMAL

4:3

16:9

16:10

CP-WX3014WN: NORMAL

4:3

16:9

16:10

NATIVE

For an HDMI
TM
signal
CP-X2514WN, CP-X3014WN, CP-X4014WN:
NORMAL

4:3

16:9

16:10

14:9
CP-WX3014WN: NORMAL

4:3

16:9

16:10

14:9

NATIVE
For a video signal, s-video signal or component video signal
CP-X2514WN, CP-X3014WN, CP-X4014WN:
4:3

16:9

14:9
CP-WX3014WN: 4:3

16:9

16:10

14:9

NATIVE
For an input signal from the LAN, USB TYPE A or USB TYPE B
port, or if there is no signal
CP-X2514WN, CP-X3014WN, CP-X4014WN: 4:3 (fixed)
CP-WX3014WN: 16:10 (fixed)
• The NORMAL mode keeps the original aspect ratio of the signal.
OVER SCAN
Using the ◄/► buttons adjusts the over-scan ratio.
Small (It magnifies picture)

Large (It reduces picture)
• This item can be selected only for a video, s-video and component
video signal.
• For an HDMI
TM
signal, this item can also be selected if either (1) or
(2) applies.
(1) HDMI FORMAT item in the INPUT menu is set to VIDEO.
(2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the
projector recognizes that it receives video signals.
(continued on next page)

Hitachi CP-X4014WN Specifications

General

Resolution	XGA (1024 x 768)
Contrast Ratio	2000:1
Display Type	3LCD
Zoom Ratio	1.2x
Aspect Ratio	4:3
Projection Size	30 - 300 inches
Native Resolution	XGA (1024 x 768)
Brightness	4000 ANSI lumens
Weight	3.6 kg
Throw Ratio	1.5 - 1.8
Input Ports	VGA, Composite Video, S-Video
Output Ports	VGA, Audio
Noise Level	37 dB (Normal Mode) / 29 dB (Eco Mode)