36
INPUT menu
Item Description
COMPUTER IN
Use the ◄/► buttons to select
the computer input signal type.
AUTO
SYNC ON G OFF
• Selecting the AUTO mode allows you to input a sync on G signal
or component video signal from the port. To input component
video signal to the projector, an RCA to D-sub cable or adapter is
required.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
FRAME LOCK
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select the input ports.
COMPUTER IN
HDMI
(2) Use the ◄/► buttons to turn the
frame lock function on/off .
ON
OFF
• This item can be performed only on a signal with a vertical
frequency of 50 to 60 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
(continued on next page)
To Next Page
Loading...
