To Next PageTo Next Page
Need help?Do you have a question about the Hitachi CR22N and is the answer not in the manual?
General| Brand | Hitachi |
|---|---|
| Model | CR22N |
| Category | Laboratory Equipment |
| Language | English |
General safety guidelines and definitions of hazard symbols DANGER, WARNING, CAUTION.
Safety precautions related to the mechanical operation and components of the centrifuge.
Safety measures for installation, maintenance, and electrical connections, including grounding.
Requirements for proper grounding and precautions against fire hazards.
Safety measures for handling toxic, radioactive, or infectious biological samples.
Instructions on how to respond if an earthquake occurs.
Identifies external components and provides dimensions of the centrifuge.
Overview of the centrifuge's internal structure and components.
Details the touchscreen interface, display areas, and buttons for operation.
Explains the power switch and safety features like rotor chamber protector and door lock.
Overview of operation modes and initial run preparation steps.
Safety warnings and guidelines for selecting and using rotors.
General overview and detailed steps for setting speed, time, temperature, and acceleration/deceleration.
Step-by-step guide for performing a normal centrifugation run.
Details on acceleration rates, deceleration slope, programmed, step-mode, RCF, g.sec, and RTC operations.
Procedures for selecting rotors, logging in users, and managing settings via the MENU screen.
Overview and details of administrative functions including user management, rotor registration, and system settings.
Safety precautions and procedures for power failure scenarios.
Safety and cautionary information before performing maintenance.
Instructions for cleaning and maintaining the rotor chamber.
Guidelines for cleaning the drive shaft (crown).
Instructions for cleaning the centrifuge cabinet and table.
Procedures for rotor maintenance after operation.
Lists consumable parts and recommended replacement timing.
Safety and cautionary information before troubleshooting.
Lists alarm messages, their causes, and corrective actions.
Common problems not reported by diagnostics and their solutions.
Safety warnings for installation and relocation.
Specifies required power, location, and clearance.
Information on grounding, cord handling, and leveling the centrifuge.
Procedures for preparing for relocation and handling the drain hose.
Details Hitachi Koki's warranty terms for the centrifuge.
Information regarding the warranty for rotors.
Lists the technical specifications for CR22N and CR21N models.
Information about CE marking compliance and requirements.
Table of cleaning and sterilization conditions for different materials.
Information on the life expectancy of plastic tubes and bottles based on usage.
Form for documenting decontamination procedures before returning the product.
Information on WEEE and Chinese environmental standards.
