Hitachi CS 40EA Handling Instructions

5
SPECIFICATIONS
○ Code “CS” of model name means “Chain saw”
Model CS40EA (38) CS40EA (40) CS40EA (45)
Engine Size (cm
3
)39.6
Spark Plug NGK BPM-7A or BPMR-7A or equivalent
Fuel Tan k Capacity (cm
3
)380
Chain Oil Tan k Capacity (cm
3
)240
Dry Weight (kg)
(Without guide bar and chain)
4.5
Guide bar length (mm) 380 400 450
Chain pitch (mm) 8.26
Chain gauge (mm) 1.27
Sound pressure level
LpA (dB (A))
by ISO 22868
103
Sound power level
Lw measured (dB (A))
by ISO 22868
Sound power level LwA (dB (A))
by 2000/14/EC
113
114
Vibration level (m/s
2
)
by ISO 22867
Front handle
Rear handle
2.2
3.2
2.2
3.2
2.2
3.2
Max. engine power
by ISO 7293 (kW)
1.8/10500
Max. engine speed (min
-1
) 13000
Idle engine speed (min
-1
) 3000
Specifi c fuel consumption (g/kWh) 480
Typ e of chain
95VP
(Oregon)
Max. chain speed (m/sec) 23.1
Sprocket (number of teeth) 7
NOTE: Equivalent noise level/vibration levels are calculated as the time-weighted energy total for noise/vibration levels under various
working conditions with the following time distribution: 1/3 idle, 1/3 full, 1/3 racing speed.
* All data subject to change without notice.
Declared single-number noise emission values are the sum
of measure values and the associated uncertainty of 3dB and they
represent upper boundaries of the range of values which is likely to occur in measurements.
000BookCS40EAEng.indb5000BookCS40EAEng.indb5 2010/08/1814:02:042010/08/1814:02:04

Hitachi CS 40EA Specifications

General

Brand	Hitachi
Model	CS 40EA
Category	Chainsaw
Language	English