Hitachi DS 12DVF User Manual

Cordless Driver Drill
Model DS 12DVF
Handling instructions
Note:
Before using this Power Tool, carefully read through these HANDLING
INSTRUCTIONS to ensure effi cient, safe operation. It is recommended
that these INSTRUCTIONS be kept readily available as an important
reference when using this power tool.

Hitachi DS 12DVF Specifications

General

Brand	Hitachi
Model	DS 12DVF
Category	Drill
Language	English

Summary

Handling Instructions

General Power Tool Safety Warnings

Work Area Safety

Guidelines for maintaining a clean and well-lit work area to prevent accidents.

Electrical Safety

Precautions regarding power tool plugs, grounding, water exposure, and cord usage.

Personal Safety

Advice on staying alert, using PPE, and preventing unintentional starting.

Power Tool Use and Care

Battery Tool Use and Care

Precautions for Cordless Driver Drill

Specifications

Battery Removal and Installation

Battery Removal

Battery Installation

Charging

Maximizing Battery Lifespan

Prior to Operation

How to Use

Confirm Cap Position

Guidance on aligning the cap for torque adjustment.

Tightening Torque Adjustment

How to adjust the tightening torque based on screw diameter and material.

Change Rotation Speed

Instructions for switching between low and high speed settings.

How to Select Tightening Power and Rotation Speed

Table and notes on selecting appropriate torque and speed settings.

Mounting and Dismounting the Bit

Check Rotation Direction

Switch Operation

Maintenance and Inspection

Tool Inspection

Mounting Screw Inspection