Hitachi DS 18DFL - DS 14 DFL Performance Per Charge

--- 9 ---
Type of work
Maker
Model
Working capacity (*1)
Driling
speed
(sec./pc.)
0
50
*500
100
*750
150
*250
200
< High speed >
< Low speed >
*1000
DS 14DFL
HITACHI
DS 14DVF3
3.3
4.4
< Low speed >
< Low speed >
0
DS 14DFL
HITACHI
DS 14DVF3
DS 14DFL
HITACHI
DS 14DVF3
DS 14DFL
HITACHI
DS 14DVF3
130
156
60
55
80
60
*610
*857
13.5
12
5.3
4.4
0.5
1.0
Remark*: Number of machine screws fastened per charge
Remark*1: Number of holes or fasteners per charge
The above table shows an example of test data. The batteries used in this test are as follows:
Model DS 14DFL: 1.5 Ah
Model DS 14DVF3: 1.4 Ah
As actually measured values listed in the above table may vary depending on sharpness of the drill bit, workpiece hardness (particularly in
wood materials), moisture content of wood, charging condition, operator skill, etc.
This data should be used as a comparative guide only.
7-2. Model DS 14DFL
Drilling and fastening performance comparison per charge