Hitachi DV 20T User Manual

the tool. In such cases, metal parts could become electrically live and present
a serious shock hazard.
23. KEEP THE RIGHT PARTS IN THE RIGHT POSITIONS. Do not remove
covers and screws which have been factory-mounted. They perform impor¬
tant respective roles. Keep them in the right positions.
24. SHOULD THE PLASTIC HOUSING OR HANDLE OF A POWER TOOL BE
CRACKED OR DEFORMED, DO NOT USE IT. Since cracked or deformed
parts may lead to an operator receiving an electric shock, do not use such
a power tool. Immediately have it repaired.
25. SECURELY MOUNT ACCESSORIES AND BLADES TO THE TOOL MAIN
BODY. Extra care must be taken when using tools on elevated location (such
as a roof ladder, scaffold, or the like) to prevent injury to someone on a lower
level in the event the tool and/or accessory should drop.
26. ALWAYS KEEP THE MOTOR AIR VENT FULLY OPENED. A constantly
open motor air vent is necessary to allow air to come in and out for cooling
the motor. Do notallow itto become clogged up,even if dust is blown through
it.
27. OPERATE POWER TOOLS AT THE RATED VOLTAGE. Operate power
tools at voltages specified on their nameplates.
28. NEVER TOUCH THE MOVING PARTS. Never touch the moving parts such
as blades, bits, cutters and others.
29. STOP OPERATION IMMEDIATELY IF ANY ABNORMALITY IS DETECT¬
ED. Should a power tool be detected as out of order or should other
abnormalities be observed during operation, stop using the tool immediately.
30. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.
Don't leave tool until it comes to a complete stop.
31. CAREFULLY HANDLE POWER TOOLS. Should a power tool be dropped
or struck against hard materials inadvertently, it may be deformed, cracked,
or damaged.
32. DO NOT WIPE PLASTIC PARTS WITH SOLVENT. Solvents such as
gasoline, thinner, benzine, carbon tetrachloride, and alcohol may damage
and crack plastic parts. Do not wipe them with such solvents. Wipe plastic
parts with a soft cloth lightly dampened with soapy water.
33. WHEN REPLACING A COMPONENT PART, ADOPT THE SAME TYPE.
When replacing a component part with a new one, adopt the same type of
new part. Also, never attempt to repair a power tool yourself.
a. SAVE THESE INSTRUCTIONS
3

Hitachi DV 20T Specifications

General

Brand	Hitachi
Model	DV 20T
Category	Drill
Language	English