Need help?Do you have a question about the Hitachi DV 18DCL2 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Battery Type | Li-Ion |
| Chuck Size | 13 mm |
| Max Torque | 45Nm |
| Weight | 1.7 kg |
Covers safe operating environment, electrical precautions, and personal protection during use.
Guidelines for proper power tool operation and battery maintenance for longevity and safety.
Details on preventing leakage, heat, explosion, and proper battery handling and storage.
Guidelines for charging temperatures and avoiding associated hazards.
Lists standard accessories, typical applications, and battery removal/installation.
Step-by-step guide for charging, including pilot lamp indications and timing.
Essential environmental checks and setting the clutch dial for torque control.
Instructions on how to adjust the tightening torque for different screws and materials.
Explains switching between rotation, hammer modes, and adjusting rotational speed.
Guidance on selecting appropriate torque and speed for various materials and fasteners.
Procedures for inspecting, cleaning, storing the tool, and handling bits.
Information on authorized repair, potential modifications, and service parts.
Details product guarantee, measured noise levels, and vibration emission data.
To Next Page
