11
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specifi c regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or normal
wear and tear. In case of complaint, please send the Power
Tool, undismantled, with the GUARANTEE CERTIFICATE
found at the end of this Handling instruction,
to a Hitachi
Authorized Service Center.
NOTE
Due to HITACHI’s continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level: 96 dB (A)
Measured A-weighted sound pressure level: 85 dB (A)
Uncertainty KpA: 3 dB (A).
Wear hearing protection.
Vibration total values (triax vector sum) determined
according to
EN60745.
Impact drilling into concrete:
Vibration emission value
ah, ID = 13.5 m/s
2
Uncertainty K = 2.4 m/s
2
Drilling into metal:
Vibration emission value
ah, D = 2.4 m/s
2
Uncertainty K = 1.5 m/s
2
The declared vibration total value has been measured in
accordance with a standard test method and may be used
for comparing one tool with another.
It may also be used in a preliminary assessment of exposure.
WARNING
◯ The vibration emission during actual use of the power
tool can diff er from
the declared total value depending on
the ways in which the tool is used.
◯ Identify safety measures to protect the operator that
are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the
operating cycle such as the times when the
tool is
switched off and when it is running idle in addition to the
trigger time).
000BookDV14DCL2.indb11000BookDV14DCL2.indb11 2012/02/298:46:552012/02/298:46:55
To Next Page
Loading...
Need help?
General
