Hitachi DV 16V User Manual

Model Hammer Drill
Modèle Perceuse percussion
Modelo Taladro de percusion
DOUBLE INSULATION
DOUBLE ISOLATION
AISLAMIENTO DOBLE
INSTRUCTIONS DE SECURITE ET MODE D’EMPLOI
AVERTISSEMENT
Une utilisation INCORRECTE OU DANGEREUSE de cet outil motorisé peut entraîner la
mort ou de sérieuses blessures corporelles !
Ce mode d’emploi contient d’importantes informations à propos de la sécurité de ce
produit. Prière de lire et de comprendre ce mode d’emploi AVANT d’utiliser l’outil
motorisé. Garder ce mode d’emploi à la disponibilité des autres utilisateurs et
propriétaires avant qu’ils utilisent l’outil motorisé. Ce mode d’emploi doit être conservé
dans un endroit sûr.
SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL
WARNING
IMPROPER OR UNSAFE use of this power tool can result in death or serious bodily
injury!
This manual contains important information about product safety. Please read and
understand this manual BEFORE operating the power tool. Please keep this manual
available for other users and owners before they use the power tool. This manual should
be stored in safe place.
INSTRUCCIONES DE SEGURIDAD Y MANUAL DE INSTRUCCIONES
ADVERTENCIA
¡La utilización INAPROPIADA O PELIGROSA de esta herramienta eléctrica puede resultar
en lesiones de gravedad o la muerte!
Este manual contiene información importante sobre la seguridad del producto. Lea y
comprenda este manual ANTES de utilizar la herramienta eléctrica. Guarde este manual
para que puedan leerlo otras personas antes de utilizar la herramienta eléctrica. Este
manual debe ser guardado en un lugar seguro.
DV 16V
01Eng_DV16V_US 9/5/07, 11:451

Hitachi DV 16V Specifications

General

Brand	Hitachi
Model	DV 16V
Category	Drill
Language	English

Summary

SAFETY

GENERAL SAFETY RULES

Outlines essential safety rules for work area, electrical safety, and personal safety.

Tool Use and Care

Service

SPECIFIC SAFETY RULES AND SYMBOLS

Electrical and Personal Safety Precautions

Covers avoiding shock from wiring, wearing ear protection, avoiding loose items, and not touching moving parts.

Safe Tool Operation Guidelines

Includes gripping, guards, using the right tool, intended use, and correct handling.

Tool Integrity and Accessory Mounting

Addresses keeping screws tight, avoiding cracked parts, and securely mounting accessories.

Handling Defective Tools and Unattended Operation

Warns against using defective tools and leaving them running unattended.

DOUBLE INSULATION FOR SAFER OPERATION

Precautions for Maintaining Double Insulation

Outlines specific precautions like using authorized service centers and cleaning methods.

ASSEMBLY AND OPERATION

PRIOR TO OPERATION

Details crucial checks and preparations before using the tool.

Mounting and dismounting of the bit

Provides step-by-step instructions for attaching and removing drill bits.

IMPACT to ROTATION changeover

Describes how to switch between hammer (impact) and drill (rotation) modes.

HOW TO USE

Switch operation

When using as a Drill or a Hammer Drill

MAINTENANCE AND INSPECTION

Inspecting the carbon brushes

Service and repairs

Mandates that all service and repairs must be done by an authorized service center.